AxiTech — Le cœur de la précision
pH Electrode for Vials and Test Tubes with BNC + PIN Connector — photographie principale
Hanna InstrumentsDisponibilité: Fourni sur commande

pH Electrode for Vials and Test Tubes with BNC + PIN Connector

Référence HI1330P

Appareil de mesure de laboratoire pH Electrode for Vials and Test Tubes with BNC + PIN Connector de Hanna Instruments. Nos techniciens assurent l'installation, l'étalonnage et la maintenance préventive, interviennent en dépannage sur site et prennent en charge la réparation en atelier ainsi que les pièces de rechange.

Commander cet article

Aucun paiement n’est effectué en ligne. Chaque demande est étudiée par un ingénieur AxiTech avant l’envoi du devis.

En un coup d’œil

Référence
HI1330P
Catégorie
pH-mètres et analyse de l'eau
Famille d’équipements
Industry/Industrial, Industry/Water, Industry/Laboratory, Product/Process controllers, Product/Accessories, Product/Accessories/Electrodes and probes, Product/Accessories/Electrodes and probes/Electro

Présentation

The HI1330P is a glass body, refillable, single junction pH electrode with a BNC + PIN connector. This electrode has a single ceramic junction in the outer reference cell and the small, spheric pH sensing portion is made with low temperature glass. This design consideration is ideal for pH measurements in vials, test tubes, and smaller vessel applications

*Products classified as Dangerous Goods can only be shipped via ground.

Maintenance contract — AxiTech provides planned preventive maintenance for pH Electrode for Vials and Test Tubes with BNC + PIN Connector from Hanna Instruments: scheduled visits, safety checks, periodic calibration and a documented service report, backed by a contractual response time.

Troubleshooting, repair and spare parts — our ph, conductivity & water analysis engineers diagnose and repair pH Electrode for Vials and Test Tubes with BNC + PIN Connector on site or in the workshop, fit genuine spare parts and recommission the equipment after performance verification.

Caractéristiques

  • Small Bulb Tip
  • Low Temperature (LT) Glass
  • Refillable Electrode

Spécifications techniques

Specifications
SKU
HI1330P Description refillable, combination pH electrode Reference single, Ag/AgCl Junction / Flow Rate ceramic, single / 15-20 µL/h Electrolyte KCl 3.5M + AgCl Max Pressure 0.1 bar Range pH: 0 to 12 Recommended Operating Temperature -5 to 70°C (23 to 158°F) - LT Tip / Shape spheric (dia: 5 mm) Temperature Sensor no Amplifier no Body Material glass Cable coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Cable
coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Range
pH: 0 to 12 Recommended Operating Temperature -5 to 70°C (23 to 158°F) - LT Tip / Shape spheric (dia: 5 mm) Temperature Sensor no Amplifier no Body Material glass Cable coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Amplifier
no Body Material glass Cable coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Reference
single, Ag/AgCl Junction / Flow Rate ceramic, single / 15-20 µL/h Electrolyte KCl 3.5M + AgCl Max Pressure 0.1 bar Range pH: 0 to 12 Recommended Operating Temperature -5 to 70°C (23 to 158°F) - LT Tip / Shape spheric (dia: 5 mm) Temperature Sensor no Amplifier no Body Material glass Cable coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Connection
BNC + pin* Special Note * For pH meters with CAL Check™ system
Description
refillable, combination pH electrode Reference single, Ag/AgCl Junction / Flow Rate ceramic, single / 15-20 µL/h Electrolyte KCl 3.5M + AgCl Max Pressure 0.1 bar Range pH: 0 to 12 Recommended Operating Temperature -5 to 70°C (23 to 158°F) - LT Tip / Shape spheric (dia: 5 mm) Temperature Sensor no Amplifier no Body Material glass Cable coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Electrolyte
KCl 3.5M + AgCl Max Pressure 0.1 bar Range pH: 0 to 12 Recommended Operating Temperature -5 to 70°C (23 to 158°F) - LT Tip / Shape spheric (dia: 5 mm) Temperature Sensor no Amplifier no Body Material glass Cable coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Tip / Shape
spheric (dia: 5 mm) Temperature Sensor no Amplifier no Body Material glass Cable coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Max Pressure
0.1 bar Range pH: 0 to 12 Recommended Operating Temperature -5 to 70°C (23 to 158°F) - LT Tip / Shape spheric (dia: 5 mm) Temperature Sensor no Amplifier no Body Material glass Cable coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Special Note
* For pH meters with CAL Check™ system
Body Material
glass Cable coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Recommended Use
specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Temperature Sensor
no Amplifier no Body Material glass Cable coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Junction / Flow Rate
ceramic, single / 15-20 µL/h Electrolyte KCl 3.5M + AgCl Max Pressure 0.1 bar Range pH: 0 to 12 Recommended Operating Temperature -5 to 70°C (23 to 158°F) - LT Tip / Shape spheric (dia: 5 mm) Temperature Sensor no Amplifier no Body Material glass Cable coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Recommended Operating Temperature
-5 to 70°C (23 to 158°F) - LT Tip / Shape spheric (dia: 5 mm) Temperature Sensor no Amplifier no Body Material glass Cable coaxial 1 m (3.3') Recommended Use specific for vials and test tubes Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Fourniture et réapprovisionnement

AxiTech fournit pH Electrode for Vials and Test Tubes with BNC + PIN Connector en pièce de rechange, afin qu’une pièce usée soit remplacée pendant la même intervention plutôt que de générer un second déplacement.

Commander pH Electrode for Vials and Test Tubes with BNC + PIN Connector

Indiquez-nous la référence, ou le modèle et le numéro de série de l’instrument concerné : nous confirmons la pièce exacte, son prix et son délai. Les pièces commandées dans le cadre d’un contrat de maintenance sont emportées lors de la visite.

  • Compatibilité vérifiée avec votre instrument avant expédition
  • Devis assorti d’un délai, et pas seulement d’un prix
  • Planifié avec votre visite de maintenance si vous êtes sous contrat
  • Commandes ouvertes pour les articles consommés à rythme régulier

L’instrument auquel il se rapporte

AxiTech entretient, étalonne et répare les instruments Hanna Instruments avec lesquels pH Electrode for Vials and Test Tubes with BNC + PIN Connector s’utilise. Si vous en exploitez un, nous pouvons le placer sous contrat de maintenance préventive et fournir cet article dans le cadre du planning.

Découvrir nos contrats de maintenanceParcourir le catalogue d’équipements

Les questions qu’on nous pose

Questions fréquentes sur Hanna Instruments pH Electrode for Vials and Test Tubes with BNC + PIN Connector

Oui. AxiTech fournit pH Electrode for Vials and Test Tubes with BNC + PIN Connector aux hôpitaux, cliniques et laboratoires, en commande ponctuelle ou selon un calendrier récurrent. Transmettez-nous la référence et la quantité : nous vous adressons un prix et un délai.

Équipements associés

Autres équipements Hanna Instruments que nous fournissons, installons et entretenons.