AxiTech — Le cœur de la précision
Refillable Double Junction pH Electrode with BNC + Pin Connector — photographie principale
Hanna InstrumentsDisponibilité: Fourni sur commande

Refillable Double Junction pH Electrode with BNC + Pin Connector

Référence HI1043P

Appareil de mesure de laboratoire Refillable Double Junction pH Electrode with BNC + Pin Connector de Hanna Instruments — AxiTech en assure la vente, l'installation et la mise en service, ainsi que la maintenance préventive, l'étalonnage, le dépannage et la réparation, avec fourniture de pièces de rechange.

Commander cet article

Aucun paiement n’est effectué en ligne. Chaque demande est étudiée par un ingénieur AxiTech avant l’envoi du devis.

En un coup d’œil

Référence
HI1043P
Catégorie
pH-mètres et analyse de l'eau
Famille d’équipements
Industry/Industrial, Industry/Water, Industry/Laboratory, Industry/Food, Industry/Beverage, Parameters/G - O/ORP, Product/Accessories, Product/Accessories/Electrodes and probes, Product/Accessories/El

Présentation

The HI1043P is a glass body, refillable, double junction pH electrode with a BNC and pin connector. The pin connector is used to enable the CAL Check function of the HI2221 , HI2222, and HI2223 benchtop meters. This electrode has a single ceramic junction in the outer reference cell and the pH sensing portion is made with high temperature glass. This design consideration is ideal for applications involving Tris buffer, hydrocarbons, paint, solvents, high conductivity samples, strong acids and bases, and for measuring samples at elevated temperatures.

Maintenance contract — AxiTech provides planned preventive maintenance for Refillable Double Junction pH Electrode with BNC + Pin Connector from Hanna Instruments: scheduled visits, safety checks, periodic calibration and a documented service report, backed by a contractual response time.

Troubleshooting, repair and spare parts — our ph, conductivity & water analysis engineers diagnose and repair Refillable Double Junction pH Electrode with BNC + Pin Connector on site or in the workshop, fit genuine spare parts and recommission the equipment after performance verification.

Caractéristiques

  • Refillable Electrode
  • Double Junction Design
  • High Temperature Glass

Spécifications techniques

Specifications
SKU
HI1043P Description refillable, combination pH electrode w/ double junction Reference e double, Ag/AgCl Junction / Flow Rate e ceramic, double / 30-40 µL/h Electrolyte KCl 3.5M Max Pressure 0.1 bar Range pH: 0 to 14 Recommended Operating Temperature 0 to 100°C (32 to 212°F) - HT Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor no Amplifier no Body Material glass — HT Cable coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Cable
coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Range
pH: 0 to 14 Recommended Operating Temperature 0 to 100°C (32 to 212°F) - HT Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor no Amplifier no Body Material glass — HT Cable coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Amplifier
no Body Material glass — HT Cable coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Reference
e double, Ag/AgCl Junction / Flow Rate e ceramic, double / 30-40 µL/h Electrolyte KCl 3.5M Max Pressure 0.1 bar Range pH: 0 to 14 Recommended Operating Temperature 0 to 100°C (32 to 212°F) - HT Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor no Amplifier no Body Material glass — HT Cable coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Connection
BNC + pin* Special Note * For pH meters with CAL Check™ system
Description
refillable, combination pH electrode w/ double junction Reference e double, Ag/AgCl Junction / Flow Rate e ceramic, double / 30-40 µL/h Electrolyte KCl 3.5M Max Pressure 0.1 bar Range pH: 0 to 14 Recommended Operating Temperature 0 to 100°C (32 to 212°F) - HT Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor no Amplifier no Body Material glass — HT Cable coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Electrolyte
KCl 3.5M Max Pressure 0.1 bar Range pH: 0 to 14 Recommended Operating Temperature 0 to 100°C (32 to 212°F) - HT Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor no Amplifier no Body Material glass — HT Cable coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Tip / Shape
spheric (dia: 9.5 mm) Temperature Sensor no Amplifier no Body Material glass — HT Cable coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Max Pressure
0.1 bar Range pH: 0 to 14 Recommended Operating Temperature 0 to 100°C (32 to 212°F) - HT Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor no Amplifier no Body Material glass — HT Cable coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Special Note
* For pH meters with CAL Check™ system
Body Material
glass — HT Cable coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Recommended Use
hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Temperature Sensor
no Amplifier no Body Material glass — HT Cable coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Junction / Flow Rate
e ceramic, double / 30-40 µL/h Electrolyte KCl 3.5M Max Pressure 0.1 bar Range pH: 0 to 14 Recommended Operating Temperature 0 to 100°C (32 to 212°F) - HT Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor no Amplifier no Body Material glass — HT Cable coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Recommended Operating Temperature
0 to 100°C (32 to 212°F) - HT Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor no Amplifier no Body Material glass — HT Cable coaxial 1 m (3.3') Recommended Use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer Connection BNC + pin* Special Note * For pH meters with CAL Check™ system
Fourniture et réapprovisionnement

AxiTech fournit Refillable Double Junction pH Electrode with BNC + Pin Connector en pièce de rechange, afin qu’une pièce usée soit remplacée pendant la même intervention plutôt que de générer un second déplacement.

Commander Refillable Double Junction pH Electrode with BNC + Pin Connector

Indiquez-nous la référence, ou le modèle et le numéro de série de l’instrument concerné : nous confirmons la pièce exacte, son prix et son délai. Les pièces commandées dans le cadre d’un contrat de maintenance sont emportées lors de la visite.

  • Compatibilité vérifiée avec votre instrument avant expédition
  • Devis assorti d’un délai, et pas seulement d’un prix
  • Planifié avec votre visite de maintenance si vous êtes sous contrat
  • Commandes ouvertes pour les articles consommés à rythme régulier

L’instrument auquel il se rapporte

AxiTech entretient, étalonne et répare les instruments Hanna Instruments avec lesquels Refillable Double Junction pH Electrode with BNC + Pin Connector s’utilise. Si vous en exploitez un, nous pouvons le placer sous contrat de maintenance préventive et fournir cet article dans le cadre du planning.

Découvrir nos contrats de maintenanceParcourir le catalogue d’équipements

Les questions qu’on nous pose

Questions fréquentes sur Hanna Instruments Refillable Double Junction pH Electrode with BNC + Pin Connector

Oui. AxiTech fournit Refillable Double Junction pH Electrode with BNC + Pin Connector aux hôpitaux, cliniques et laboratoires, en commande ponctuelle ou selon un calendrier récurrent. Transmettez-nous la référence et la quantité : nous vous adressons un prix et un délai.

Équipements associés

Autres équipements Hanna Instruments que nous fournissons, installons et entretenons.