AxiTech — The Core of Precision
BOECO Binocular Microscope - BM-700 — main photograph
BOECO GermanyAvailability: Supplied to order

BOECO Binocular Microscope - BM-700

Reference BOE 7000.570

Our advanced biological Microscope for educational, teaching, life science and clinical applications. The Anti-Fungus treatment protects the optical system, objectives and eyepieces in high-humidity environments. The new designed F=200 mm Infinite Plan achromatic objectives provide a fully corrected image for clear visual and digital results.

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference
BOE 7000.570
Category
Microscopes
Product range
Microscopes

Technical specifications

Stage
Double layer mechanical specimen stage. 216 x 150 mm Travel area 78 x 54 mm, Right hand stage handle
Weight
Net weight 7,0 / 7,2 kgs
Packing
styrofoam shelve in a cardboard box
Eyepiece
Pair Eyepiece WF 10X /20 mm, diopter adjustable, with anti fungus treatment, Interpupillary Distance 47-75 mm
Focusing
Low position, coaxial coarse and calibrated fine focus control, with graduation reading 2 microns per division. Total focusing range 24 mm, Safety autofocus stop unit.
Condenser
Sliding-in centerable Bright field condenser, n.A. 1,25, Integrated Iris diaphragm and filter tray.
Dimension
204 x 376 x 406 mm
Nosepiece
Backward quadruple revolving nosepiece
Show 6 more specifications
Objectives
BOECO Anti Fungus Infinite Plan Achromat Objectives 4x, 10x, 40x (S), 100x (S) (Oil)
Body /power
Sturdy body with supportive rubber and inbuilt power supply 100 - 240V, 50/60 Hz
Illumination
3W LED lamp, Koehler illumination, brightness adjustable.
Optical Head
Siedentopf Binocular Head, 30° inclined, 360° rotatable, with high quality infinite optical system
Specification
BM-700:
Supplied with
Dust cover, green filter, immersion oil and instruction manual
Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for BOECO Binocular Microscope - BM-700

A service visit on the BOECO Binocular Microscope - BM-700 covers cleaning of the objectives, eyepieces and condenser, alignment of the illumination, and the mechanical stage, focus drive and nosepiece.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Microscopes like the BOECO Binocular Microscope - BM-700 are normally serviced once a year; instruments used in humid rooms benefit from more frequent cleaning to keep fungus off the optics.

  • Objectives, eyepieces, condenser and filters cleaned
  • Illumination and Köhler alignment adjusted
  • Focus mechanism, stage and nosepiece serviced
  • Camera, light source and electrical safety checked where fitted

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for BOECO Binocular Microscope - BM-700

When BOECO Binocular Microscope - BM-700 fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

The usual problems with microscopes are dirty or fungus-affected optics, immersion oil on dry objectives, misaligned illumination, and worn or stiff focus drives.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop
Troubleshooting

How to troubleshoot BOECO Binocular Microscope - BM-700

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

  1. Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.

  2. Clean the eyepieces, objectives and condenser lens with lens tissue and the correct cleaning fluid, and remove immersion oil from the oil objective after every use.

  3. Check the light path: condenser height, field and aperture diaphragms, and that no filter has been left in the wrong position.

  4. If the image is still blurred, try another slide and objective to tell a sample problem from an optical fault.

  5. If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for BOECO Binocular Microscope - BM-700.

What to send us when you report the fault

  • Manufacturer, model and serial number, from the rating plate
  • The exact error code or message, and the screen it appears on
  • When the fault started, how often it occurs and what triggers it
  • A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using BOECO Binocular Microscope - BM-700 and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing BOECO Binocular Microscope - BM-700

AxiTech supplies BOECO Binocular Microscope - BM-700 together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training
Product FAQ

Questions about the BOECO Binocular Microscope - BM-700

Our advanced biological Microscope for educational, teaching, life science and clinical applications. The Anti-Fungus treatment protects the optical system, objectives and eyepieces in high-humidity environments.

Related equipment

Other BOECO Germany equipment we supply, install and maintain.