AxiTech — The Core of Precision
LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic — main photograph
BOECO GermanyAvailability: Supplied to order

LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic

Reference 335

The simple solution for H2O pure type ASTM I + ASTM II

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference
335
Category
Water Purification & Stills
Product range
Water Purification

Overview

The BOECOpure PLUS standard xs is an extremly compact system and the best choice when small volumes of both pure water and ultrapure water are required. It offers great flexibility and can be directly connected to the drin- king water supply.

The standard OptiFill dispenser is a flexible extraction solution for a kind of laboratory vessels. The ergonomic shape of it enables onehanded use of it for both system operation and the monitoring of all quality parameters.

The dispensing of pure water and ultrapure water from a single system is made possibe by the need-filling combination of ultra-modern purification technologies.

Features: » Reliable ASTM I + II water quality supply » Tap water set for direct drinking water connection » Optifill dispenser as standard: » enables one handed dispenser operation » is detachable and ergonomically shaped » can be turned by 170 degrees/80 cm in diameter and is height adjustable » Simple and economical filter replacement » Clear view of controls with graphics display » Leak detector is included as a standard » Supply including all mandatory filters and consumables for start-up and operation)

The BOECOpure PLUS UV is supplemented with UV-oxidation, 185/254 nm. ASTM Type I Ultrapure water applicable for Molecular biology, microbiology, PCR, inorganic and organic trace analysis HPLC, ICP, TOC-analysis

ASTM Type II pure water applicable for Rinsing laboratory glassware, preparing and diluting buffers, reagents, tissue culture media and dyes. Sample preparation for analytical methods such as flame AAS

BOECOpure PLUS UV/UF Flow chart

Technical specifications

Code
Description
PH range
4 up to 10
BOE 8211051
BOECOpure PLUS Standard xs basic Typical application: AAS, IC, ICP, buffers and media preparation
BOE 8211052
BOECOpure PLUS UV xs basic Typical application: Ultra-trace analysis, ICP-MS, HPLC, TOC
BOE 16511100
Pre-filter insert 1 µm, 10“
BOE 16531110
Filter housing 10“ without Pre-filter
BOE 19100300
Sterile filter capsule 0,2 µm
BOE 19102100
Bio filter capsule
Show 26 more specifications
BOE 19111300
Sterile filter capsule 0,2 µm
BOE 19200007
RO cartridge xs 5 l/h
BOE 19200057
Disinfectant BOECOpure PLUS
BOE 19200091
Disinfection unit BOECOpure PLUS xs
BOE 19200103
Ultrapure water cartridge xs 055
BOE 19200305
Wall mounting BOECOpure PLUS xs
TOC-Value (ppm)
< 1
Weight dry (kg)
19
TOC Value* (ppb)
< 10
Colloid index SDI
< 10
Free chlorine (ppm)
< 3
Hardeness [as CaCo3]*
< 300
Port size - tap water
R 3/4 - female
Feedwater pressure (bar)
0,5 up to 6
Total connected load (W)
120
Ambient temperature (°C)
+ 2 up to + 35
Dimensions, (W x D x H mm)
253 x 530 x 520
Feedwater temperature (°C)
+ 2 up to + 35
Specification BOECOpue PLUS
Standard xsbasic
Bacterial ** content (KBE/ml)
< 0,01
Conductivity at 25°C (µS/cm)
< 2000
Resistance at 25°C (MΩ x cm)
18. Feb
Dispensing performance (l/min.)
up to 2
Electrical connection (Volt/Hz)
90-240 / 50-60
Particles ** content < 0.2 µ (1/ml)
< 1ml
Pure water performance at 15°C (l/h)
5
Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for BOECO Germany LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic

A service visit on the BOECO Germany LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic covers descaling of the boiler or heater, the condenser and water circuit, output water quality, cartridges and filters, and the level and safety controls.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Water stills and purification units like the BOECO Germany LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic are normally serviced once or twice a year, with the descaling interval set by the hardness of the feed water.

  • Boiler or heater descaled and cleaned
  • Output water quality checked by conductivity
  • Cartridges, resins and filters replaced as needed
  • Level controls, safety cut-outs and electrical safety tested

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for BOECO Germany LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic

When BOECO Germany LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

Frequent faults are scale on heating elements, exhausted cartridges giving poor water quality, failed level switches, and cooling-water flow problems.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop
Troubleshooting

How to troubleshoot BOECO Germany LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

  1. Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.

  2. Check the feed-water supply and the cooling-water flow: low pressure or flow stops distillation or trips the safety cut-out.

  3. Inspect the boiler for scale and descale it following the manual if deposits are visible.

  4. Measure the conductivity of the output water — a rising value means exhausted cartridges or carry-over.

  5. If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for BOECO Germany LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic.

What to send us when you report the fault

  • Manufacturer, model and serial number, from the rating plate
  • The exact error code or message, and the screen it appears on
  • When the fault started, how often it occurs and what triggers it
  • A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using BOECO Germany LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing BOECO Germany LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic

AxiTech supplies BOECO Germany LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training
Product FAQ

Questions about the BOECO Germany LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic

Plan for the following when installing the BOECO Germany LABORATORY WATER PURIFICATION SYSTEM BOECOpure PLUS standard xs basic BOECOpure PLUS UV xs basic: dimensions 253 x 530 x 520; ambient temperature + 2 up to + 35. AxiTech delivers, installs and commissions it, then verifies it against the manufacturer's specification before handover.

Related equipment

Other BOECO Germany equipment we supply, install and maintain.