AxiTech — The Core of Precision
BOECO Dest Tank 4000 / 8000 — main photograph
BOECO GermanyAvailability: Supplied to order

BOECO Dest Tank 4000 / 8000

Reference BOE 8704500

Stainless steel water still for automatic and continuous operation with built-in 8/16 l storage tank. For bench and wall mounting. Supplied with wall mounting bracket. Excellent quality of distillation. An electronic level switch switches the still off when the storage tank is full and restarts it automatically when destilled water is withdrawn. Dispenser Tap of distilled water. With flow regulator to avoid excessive water consumption.

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference
BOE 8704500
Category
Water Purification & Stills
Product range
Water Stills

Technical specifications

Power
3000 W
Safety
Low water level & over heating cut-off
Switch
Main power with pilot lamp
Weight
approx 24 kg
Outer part
Galvanized steel & powder coating
Size (wxdxh)
620 x 330 x 460 mm
Cooling water
approx. 55 l/h
Specification
Tank 4000
Show 4 more specifications
Water tank capacity
8 l.
Distillate flow rate
approx 4 l/h
Material: Inner part
Stainless steel
Cond. of dist water (20°C)
approx 1,5 µS/cm
Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for BOECO Dest Tank 4000 / 8000

A service visit on the BOECO Dest Tank 4000 / 8000 covers descaling of the boiler or heater, the condenser and water circuit, output water quality, cartridges and filters, and the level and safety controls.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Water stills and purification units like the BOECO Dest Tank 4000 / 8000 are normally serviced once or twice a year, with the descaling interval set by the hardness of the feed water.

  • Boiler or heater descaled and cleaned
  • Output water quality checked by conductivity
  • Cartridges, resins and filters replaced as needed
  • Level controls, safety cut-outs and electrical safety tested

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for BOECO Dest Tank 4000 / 8000

When BOECO Dest Tank 4000 / 8000 fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

Frequent faults are scale on heating elements, exhausted cartridges giving poor water quality, failed level switches, and cooling-water flow problems.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop
Troubleshooting

How to troubleshoot BOECO Dest Tank 4000 / 8000

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

  1. Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.

  2. Check the feed-water supply and the cooling-water flow: low pressure or flow stops distillation or trips the safety cut-out.

  3. Inspect the boiler for scale and descale it following the manual if deposits are visible.

  4. Measure the conductivity of the output water — a rising value means exhausted cartridges or carry-over.

  5. If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for BOECO Dest Tank 4000 / 8000.

What to send us when you report the fault

  • Manufacturer, model and serial number, from the rating plate
  • The exact error code or message, and the screen it appears on
  • When the fault started, how often it occurs and what triggers it
  • A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using BOECO Dest Tank 4000 / 8000 and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing BOECO Dest Tank 4000 / 8000

AxiTech supplies BOECO Dest Tank 4000 / 8000 together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training
Product FAQ

Questions about the BOECO Dest Tank 4000 / 8000

Stainless steel water still for automatic and continuous operation with built-in 8/16 l storage tank. For bench and wall mounting. Supplied with wall mounting bracket.

Related equipment

Other BOECO Germany equipment we supply, install and maintain.