AxiTech — The Core of Precision
BOECO Life Science Spectrophotometer S-300 — main photograph
BOECO GermanyAvailability: Supplied to order

BOECO Life Science Spectrophotometer S-300

Reference BOE 8630000

Spectrophotometer by BOECO Germany

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference
BOE 8630000
Category
Spectrophotometers & Photometers
Product range
Spectrophotometers

Technical specifications

GLP
Real time clock and calendar, Self Diagnosis
Size
400 (W) x 280 (D) x160 (H) mm
Memory
SD card storage
Weight
4 kgs
Printer
specified 80-column thermal printer (series port)
Detector
Silicon photodiode
Time Scan
Graphical and calculated reaction activity
Absorbance
-0.3 to 1.999
Show 21 more specifications
Noise level
0.005 Abs ( at 250 nm)
Stray light
? 0.5% T at 220, 340 nm
Light source
pulsed-Xenon lamp
Specification
S-300 UV/VIS
Concentration
0 to 1999
Metering mode
Single beam
Transmittance
0 to 199.9%
Display screen
4,3 inches colorful touch LCD screen
Wavelength Range
190 to 1000nm
Power consumption
100VA
Power requirement
AC, 100-240V, 50/60Hz
Spectrum Scanning
Yes
Spectral Bandwidth
5nm
Communication ports
Serial printer port connects thermal printer
Wavelength accuracy
± 2nm
Wavelength Resolution
0,2nm
Transmittance accuracy
±1% T (NIST 930 Filter)
Wavelegth Scan Analysis
Absorbance and wavelength of peaks and valleys
Wavelength repeatability
? 1nm
Transmittance repeatability
0.50% T
Detection limit Concentration
dsDNA 1.5 - 100µh/ml (for 100µl cell)
Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for BOECO Life Science Spectrophotometer S-300

A service visit on the BOECO Life Science Spectrophotometer S-300 covers the optical path — light source, cell holder and detector — with wavelength and photometric accuracy verified against certified reference standards, plus cleaning and a check of the zero and calibration functions.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Optical instruments like the BOECO Life Science Spectrophotometer S-300 are usually verified once a year with certified reference standards, and whenever a result is questioned; users should run the manufacturer's check standards between visits.

  • Wavelength and photometric accuracy verified with certified reference standards
  • Light source, detector and cell holder inspected and cleaned
  • Zero, blank and calibration functions checked
  • Firmware, data output and power supply checked

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for BOECO Life Science Spectrophotometer S-300

When BOECO Life Science Spectrophotometer S-300 fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

The usual faults on optical instruments are dirty or scratched cuvettes and optics, an ageing lamp or LED, stray light, and calibration drift.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop
Troubleshooting

How to troubleshoot BOECO Life Science Spectrophotometer S-300

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

  1. Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.

  2. Use clean, unscratched cuvettes wiped with a lint-free cloth, filled to the mark and inserted the same way round every time.

  3. Zero or blank the instrument with the sample itself, or with distilled water for a refractometer, before measuring.

  4. Measure a check standard: if it reads correctly, the fault lies with the sample or the reagent rather than the instrument.

  5. If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for BOECO Life Science Spectrophotometer S-300.

What to send us when you report the fault

  • Manufacturer, model and serial number, from the rating plate
  • The exact error code or message, and the screen it appears on
  • When the fault started, how often it occurs and what triggers it
  • A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using BOECO Life Science Spectrophotometer S-300 and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing BOECO Life Science Spectrophotometer S-300

AxiTech supplies BOECO Life Science Spectrophotometer S-300 together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training
Product FAQ

Questions about the BOECO Life Science Spectrophotometer S-300

The BOECO Life Science Spectrophotometer S-300 measures with the following optical system: 190 to 1000nm.

Related equipment

Other BOECO Germany equipment we supply, install and maintain.