edge® Multiparameter EC/TDS/Salinity Meter

Reference HI2030-01

edge's groundbreaking design is the culmination of Hanna's vision, design capabilities, integrated production and world class R&D. The edge meter is only 0.5" thick yet rich in features to accommodate the needs of a vast amount of customers. For those that prefer very simplistic operation there is a basic mode operation with simplified menu and options while for those who require advanced features there is the full featured standard operating mode. The edge ® HI2030 EC/TDS/Salinity kit can can be upgraded at any time with additional probes to measure pH or Dissolved Oxygen.

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference: HI2030-01
Category: pH, Conductivity & Water Analysis
Equipment family: Industry/Industrial, Industry/Industrial/Chemical manufacturing, Industry/Industrial/Water treatment, Industry/Water, Industry/Water/Aquaculture, Industry/Water/Wastewater, Industry/Water/Drinking wat

Overview

Maintenance contract — AxiTech provides planned preventive maintenance for edge® Multiparameter EC/TDS/Salinity Meter from Hanna Instruments: scheduled visits, safety checks, periodic calibration and a documented service report, backed by a contractual response time.

Troubleshooting, repair and spare parts — our ph, conductivity & water analysis engineers diagnose and repair edge® Multiparameter EC/TDS/Salinity Meter on site or in the workshop, fit genuine spare parts and recommission the equipment after performance verification.

Features

edge ® features a 5.5" LCD display that you can clearly view from over 5 meters. The large display and it's wide 150° viewing angle provide one of the easiest to read LCD's in the industry.
edge ® features a capacitive touch keypad that gives a distinctive, modern look. Since the keypad is part of the screen, your buttons can never get clogged with sample residue.
edge ® features clear, full text guides displayed on the bottom of the screen. There is no need to decipher scrambled abbreviations or symbols; these helpful messages guide you through every process quickly and easily.

Technical specifications

Specifications

SKU: HI2030-01 pH Range pH: -2.000 to 16.000, -2.00 to 16.00 ±1000 mV pH Resolution 0.001 pH, 0.01 pH 0.1 mV pH Accuracy (@25°C/77°F) ±0.01 pH, ±0.002 pH ±0.2 mV pH Calibration Automatic, up to 3 points (5 points*) calibration, 5 standard (7 standard*) buffers available (1.68*, 4.01 or 3.00, 6.86, 7.01, 9.18, 10.01, 12.45*) and 2 custom buffers* pH Temperature Compensation Automatic -5 to 100˚ C (23 to 212˚ F) (using integral temperature sensor) EC Range 0.00 to 29.99 μS/cm, 3.00 to 29.99 μS/cm, 30.0 to 299.9 μS/cm, 300 to 2999 μS/cm, 3.00 to 29.99 mS/cm, 30.0 to 200.0 mS/cm, up to 500.0 mS/cm EC Resolution 0.01 μS/cm, 00.1 μS/cm, 0.01 μS/cm, 0.01 mS/cm, 00.1 mS/cm EC Accuracy ±1% of reading (±0.05 μS/cm or 1 digit, whichever is greater) EC Calibration 1 Cell Factor calibration 6 standards available: 84, 1413 μS/cm, 5.00, 12.88, 80.0, 111.8 mS/cm, 1 point offset: 0.00 μS/cm TDS Range 0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150. to 1499. ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L absolute TDS ‡ (with 0.80 factor) TDS Resolution 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L TDS Accuracy ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Weight: 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
DO Probe: HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
DO Range: 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
EC Range: 0.00 to 29.99 μS/cm, 3.00 to 29.99 μS/cm, 30.0 to 299.9 μS/cm, 300 to 2999 μS/cm, 3.00 to 29.99 mS/cm, 30.0 to 200.0 mS/cm, up to 500.0 mS/cm EC Resolution 0.01 μS/cm, 00.1 μS/cm, 0.01 μS/cm, 0.01 mS/cm, 00.1 mS/cm EC Accuracy ±1% of reading (±0.05 μS/cm or 1 digit, whichever is greater) EC Calibration 1 Cell Factor calibration 6 standards available: 84, 1413 μS/cm, 5.00, 12.88, 80.0, 111.8 mS/cm, 1 point offset: 0.00 μS/cm TDS Range 0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150. to 1499. ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L absolute TDS ‡ (with 0.80 factor) TDS Resolution 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L TDS Accuracy ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Warranty: 2 years
PH Range: pH: -2.000 to 16.000, -2.00 to 16.00 ±1000 mV pH Resolution 0.001 pH, 0.01 pH 0.1 mV pH Accuracy (@25°C/77°F) ±0.01 pH, ±0.002 pH ±0.2 mV pH Calibration Automatic, up to 3 points (5 points*) calibration, 5 standard (7 standard*) buffers available (1.68*, 4.01 or 3.00, 6.86, 7.01, 9.18, 10.01, 12.45*) and 2 custom buffers* pH Temperature Compensation Automatic -5 to 100˚ C (23 to 212˚ F) (using integral temperature sensor) EC Range 0.00 to 29.99 μS/cm, 3.00 to 29.99 μS/cm, 30.0 to 299.9 μS/cm, 300 to 2999 μS/cm, 3.00 to 29.99 mS/cm, 30.0 to 200.0 mS/cm, up to 500.0 mS/cm EC Resolution 0.01 μS/cm, 00.1 μS/cm, 0.01 μS/cm, 0.01 mS/cm, 00.1 mS/cm EC Accuracy ±1% of reading (±0.05 μS/cm or 1 digit, whichever is greater) EC Calibration 1 Cell Factor calibration 6 standards available: 84, 1413 μS/cm, 5.00, 12.88, 80.0, 111.8 mS/cm, 1 point offset: 0.00 μS/cm TDS Range 0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150. to 1499. ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L absolute TDS ‡ (with 0.80 factor) TDS Resolution 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L TDS Accuracy ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
TDS Range: 0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150. to 1499. ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L absolute TDS ‡ (with 0.80 factor) TDS Resolution 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L TDS Accuracy ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Dimensions: 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
EC Accuracy: ±1% of reading (±0.05 μS/cm or 1 digit, whichever is greater) EC Calibration 1 Cell Factor calibration 6 standards available: 84, 1413 μS/cm, 5.00, 12.88, 80.0, 111.8 mS/cm, 1 point offset: 0.00 μS/cm TDS Range 0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150. to 1499. ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L absolute TDS ‡ (with 0.80 factor) TDS Resolution 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L TDS Accuracy ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Environment: 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
EC/TDS Probe: HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Power Supply: 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
TDS Accuracy: ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
PH Electrode: HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
DO Resolution: 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
EC Resolution: 0.01 μS/cm, 00.1 μS/cm, 0.01 μS/cm, 0.01 mS/cm, 00.1 mS/cm EC Accuracy ±1% of reading (±0.05 μS/cm or 1 digit, whichever is greater) EC Calibration 1 Cell Factor calibration 6 standards available: 84, 1413 μS/cm, 5.00, 12.88, 80.0, 111.8 mS/cm, 1 point offset: 0.00 μS/cm TDS Range 0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150. to 1499. ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L absolute TDS ‡ (with 0.80 factor) TDS Resolution 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L TDS Accuracy ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Special Notes: ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
PH Resolution: 0.001 pH, 0.01 pH 0.1 mV pH Accuracy (@25°C/77°F) ±0.01 pH, ±0.002 pH ±0.2 mV pH Calibration Automatic, up to 3 points (5 points*) calibration, 5 standard (7 standard*) buffers available (1.68*, 4.01 or 3.00, 6.86, 7.01, 9.18, 10.01, 12.45*) and 2 custom buffers* pH Temperature Compensation Automatic -5 to 100˚ C (23 to 212˚ F) (using integral temperature sensor) EC Range 0.00 to 29.99 μS/cm, 3.00 to 29.99 μS/cm, 30.0 to 299.9 μS/cm, 300 to 2999 μS/cm, 3.00 to 29.99 mS/cm, 30.0 to 200.0 mS/cm, up to 500.0 mS/cm EC Resolution 0.01 μS/cm, 00.1 μS/cm, 0.01 μS/cm, 0.01 mS/cm, 00.1 mS/cm EC Accuracy ±1% of reading (±0.05 μS/cm or 1 digit, whichever is greater) EC Calibration 1 Cell Factor calibration 6 standards available: 84, 1413 μS/cm, 5.00, 12.88, 80.0, 111.8 mS/cm, 1 point offset: 0.00 μS/cm TDS Range 0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150. to 1499. ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L absolute TDS ‡ (with 0.80 factor) TDS Resolution 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L TDS Accuracy ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
DO Calibration: One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
EC Calibration: 1 Cell Factor calibration 6 standards available: 84, 1413 μS/cm, 5.00, 12.88, 80.0, 111.8 mS/cm, 1 point offset: 0.00 μS/cm TDS Range 0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150. to 1499. ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L absolute TDS ‡ (with 0.80 factor) TDS Resolution 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L TDS Accuracy ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Salinity Range: 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
TDS Resolution: 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L TDS Accuracy ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
PH Calibration: Automatic, up to 3 points (5 points*) calibration, 5 standard (7 standard*) buffers available (1.68*, 4.01 or 3.00, 6.86, 7.01, 9.18, 10.01, 12.45*) and 2 custom buffers* pH Temperature Compensation Automatic -5 to 100˚ C (23 to 212˚ F) (using integral temperature sensor) EC Range 0.00 to 29.99 μS/cm, 3.00 to 29.99 μS/cm, 30.0 to 299.9 μS/cm, 300 to 2999 μS/cm, 3.00 to 29.99 mS/cm, 30.0 to 200.0 mS/cm, up to 500.0 mS/cm EC Resolution 0.01 μS/cm, 00.1 μS/cm, 0.01 μS/cm, 0.01 mS/cm, 00.1 mS/cm EC Accuracy ±1% of reading (±0.05 μS/cm or 1 digit, whichever is greater) EC Calibration 1 Cell Factor calibration 6 standards available: 84, 1413 μS/cm, 5.00, 12.88, 80.0, 111.8 mS/cm, 1 point offset: 0.00 μS/cm TDS Range 0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150. to 1499. ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L absolute TDS ‡ (with 0.80 factor) TDS Resolution 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L TDS Accuracy ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
TDS Calibration: through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Salinity Accuracy: ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Temperature Range: -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Salinity Resolution: 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Ordering Information: HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Salinity Calibration: 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Temperature Accuracy: ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Salinity Compensation: 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Sodium Chloride Range: 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Temperature Resolution: 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
DO Altitude Compensation: -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Sodium Chloride Accuracy: ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
DO Accuracy (@25˚C/77˚F): ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Sodium Chloride Resolution: 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
PH Accuracy (@25°C/77°F): ±0.01 pH, ±0.002 pH ±0.2 mV pH Calibration Automatic, up to 3 points (5 points*) calibration, 5 standard (7 standard*) buffers available (1.68*, 4.01 or 3.00, 6.86, 7.01, 9.18, 10.01, 12.45*) and 2 custom buffers* pH Temperature Compensation Automatic -5 to 100˚ C (23 to 212˚ F) (using integral temperature sensor) EC Range 0.00 to 29.99 μS/cm, 3.00 to 29.99 μS/cm, 30.0 to 299.9 μS/cm, 300 to 2999 μS/cm, 3.00 to 29.99 mS/cm, 30.0 to 200.0 mS/cm, up to 500.0 mS/cm EC Resolution 0.01 μS/cm, 00.1 μS/cm, 0.01 μS/cm, 0.01 mS/cm, 00.1 mS/cm EC Accuracy ±1% of reading (±0.05 μS/cm or 1 digit, whichever is greater) EC Calibration 1 Cell Factor calibration 6 standards available: 84, 1413 μS/cm, 5.00, 12.88, 80.0, 111.8 mS/cm, 1 point offset: 0.00 μS/cm TDS Range 0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150. to 1499. ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L absolute TDS ‡ (with 0.80 factor) TDS Resolution 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L TDS Accuracy ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
DO Temperature Compensation: 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
EC to TDS Conversion Factor: 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Sodium Chloride Calibration: 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
PH Temperature Compensation: Automatic -5 to 100˚ C (23 to 212˚ F) (using integral temperature sensor) EC Range 0.00 to 29.99 μS/cm, 3.00 to 29.99 μS/cm, 30.0 to 299.9 μS/cm, 300 to 2999 μS/cm, 3.00 to 29.99 mS/cm, 30.0 to 200.0 mS/cm, up to 500.0 mS/cm EC Resolution 0.01 μS/cm, 00.1 μS/cm, 0.01 μS/cm, 0.01 mS/cm, 00.1 mS/cm EC Accuracy ±1% of reading (±0.05 μS/cm or 1 digit, whichever is greater) EC Calibration 1 Cell Factor calibration 6 standards available: 84, 1413 μS/cm, 5.00, 12.88, 80.0, 111.8 mS/cm, 1 point offset: 0.00 μS/cm TDS Range 0.00 to 14.99 ppm (mg/L), 15.0 to 149.9 ppm (mg/L), 150. to 1499. ppm (mg/L), 1.50 to 14.99 g/L, 15.0 to 100.0 g/L, up to 400.0 g/L absolute TDS ‡ (with 0.80 factor) TDS Resolution 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L TDS Accuracy ±1% of reading (±0.03 ppm or 1 digit, whichever is greater) TDS Calibration through EC calibration EC/TDS Temperature Compensation Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
EC/TDS Temperature Compensation: Automatic -5 to 100 ºC (23 to 212 ºF) NoTC - can be selected to measure absolute conductivity. Temperature Correction Coefficient 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Salinity Temperature Compensation: 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years
Temperature Correction Coefficient: 0.00 to 6.00% / ºC (for EC and TDS only). Default value is 1.90% / ºC EC to TDS Conversion Factor 0.40 to 0.80 (default value is 0.50) Salinity Range 0.0 to 400.0% NaCl, 0.01 to 42.00 PSU, 0.0 to 80.0 g/L* Salinity Resolution 0.1% NaCl, 0.01 PSU, 0.01 g/L Salinity Accuracy ±1% of reading Salinity Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) Salinity Temperature Compensation 0 to 40 g/L (with 1 g/L resolution) Sodium Chloride Range 0.0 to 400.0% NaCl Sodium Chloride Resolution 0.1% NaCl Sodium Chloride Accuracy ±1% of reading Sodium Chloride Calibration 1 point with HI 7037L 100% NaCl sea water standard (other scales through EC calibration) DO Range 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 °C (32.0 to 122.0 °F)** DO Accuracy (@25˚C/77˚F) ±1.5% of reading or ±1 digit DO Resolution 0.01 ppm (mg/L) 0.1% saturation DO Calibration One or two points at 0% (HI 7040) and 100% (water saturated air) DO Temperature Compensation 0.0 to 50.0 ˚C (32.0 to 122 ˚F) Salinity Compensation 0 to 40 g/L, 1 g/L DO Altitude Compensation -500 to 4000 m (with 100 m resolution) Temperature Range -20.0 to 120.0 ˚C, -4.0 to 248.0 °F Temperature Resolution 0.1 °C, 0.1 °F Temperature Accuracy ±0.5 °C, ±1.0 °F pH Electrode HI11310 digital double junction, refillable with 3.5M KCl electrolyte solution pH electrode, built in temperature sensor, and 3.5 mm connector.ᵻ EC/TDS Probe HI763100 EC/temperature probe DO Probe HI764080 DO/temperature probeᵻ Power Supply 5 VDC adapter (included) Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions 202 x 140 x 12.7mm (8in. x 5.5in. x 0.5in.) Weight 250 g (8.82 oz) Ordering Information HI2030 EC kit includes: HI763100 Conductivity probe, 4 sachets of 1413 μS/cm conductivity standard, 2 sachets of 5000 μS/cm conductivity standard, 2 sachets of 12880 μS/cm conductivity standard, 2 sachets general purpose rinse solution, USB cable, benchtop docking station with electrode holder, wall mount cradle, 5 VDC power adapter, quality certificate and instruction manual. Special Notes ‡ absolute conductivity *temperature limits will be reduced to actual probe/sensor limits ** with temperature compensation function disabled ᵻAvailable for purchase separately Warranty 2 years

Documentation and downloads

MANEDGE_10_16 DownloadPDF documentopens in a new tab

Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for edge® Multiparameter EC/TDS/Salinity Meter

AxiTech provides preventive maintenance contracts for edge® Multiparameter EC/TDS/Salinity Meter. Each contract fixes a schedule of planned visits in which our biomedical engineers inspect the equipment, replace wear parts before they fail, and verify that it still performs inside the manufacturer’s tolerances.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Plan at least one preventive maintenance visit per year, and a second visit for equipment in continuous or critical use.

Planned preventive maintenance visits at a fixed interval
Calibration and performance verification against the manufacturer’s specifications
A documented maintenance report after every intervention
Guaranteed availability of spare parts and consumables
A contractual response time when the equipment fails

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for edge® Multiparameter EC/TDS/Salinity Meter

When edge® Multiparameter EC/TDS/Salinity Meter fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

The faults we see most often are worn moving parts, power-supply and control-board failures, sensors that have drifted out of tolerance, and fluid or air paths that have become blocked or contaminated.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop

Troubleshooting

How to troubleshoot edge® Multiparameter EC/TDS/Salinity Meter

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.
Confirm the power supply end to end — wall outlet, mains lead, fuse and any UPS or stabiliser in between. A device that is intermittently dead has a supply fault far more often than an internal one.
Check the consumables and wear parts — filters, seals, tubing, probes, batteries — and note when each was last replaced. Anything past its service interval is the first suspect.
Reproduce the fault once, deliberately, and record the sequence: what the operator did, what the device displayed, and whether a full power cycle clears it.
If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for edge® Multiparameter EC/TDS/Salinity Meter.

What to send us when you report the fault

Manufacturer, model and serial number, from the rating plate
The exact error code or message, and the screen it appears on
When the fault started, how often it occurs and what triggers it
A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using edge® Multiparameter EC/TDS/Salinity Meter and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing edge® Multiparameter EC/TDS/Salinity Meter

AxiTech supplies edge® Multiparameter EC/TDS/Salinity Meter together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training

Questions we are asked

Frequently asked questions about Hanna Instruments edge® Multiparameter EC/TDS/Salinity Meter

Yes. AxiTech services edge® Multiparameter EC/TDS/Salinity Meter, either under a maintenance contract or as a one-off intervention. Our biomedical engineers cover preventive maintenance, calibration, corrective repair and spare-parts supply for this equipment.

Plan at least one preventive maintenance visit per year, and a second visit for equipment in continuous or critical use. The exact schedule is set in your maintenance contract and follows the manufacturer’s recommendations, the workload of the department and the requirements of your accreditation body.

Yes. We repair edge® Multiparameter EC/TDS/Salinity Meter regardless of where it was purchased, and you do not need an existing contract with us to request an intervention. We diagnose the fault, quote the repair and the spare parts, and only proceed once you approve.

Yes. We supply spare parts and consumables for edge® Multiparameter EC/TDS/Salinity Meter, including wear parts replaced during preventive maintenance. Parts held under a maintenance contract are covered by a guaranteed availability commitment.

Under a maintenance contract, our response time is contractual and is agreed before the contract starts — same working day for equipment classified as critical. Without a contract we schedule the intervention as soon as an engineer and the required spare parts are available.

Run the first-line checks published on this page: capture the exact symptom, the error code and the serial number, confirm the power supply and the consumables, and note any recent change to the installation. A large share of the call-outs we attend are resolved by one of those checks, and the ones that are not reach our engineers already half-diagnosed.

Yes, for a first assessment. Send us the model, the serial number, the error code and a photograph of the display or of the fault, and an engineer will tell you whether it is a consumable, a user-serviceable item or a fault that needs an on-site intervention — normally the same working day.

Other Hanna Instruments equipment we supply, install and maintain.

Request a service for this equipment

At a glance

Overview

Features

Technical specifications

Documentation and downloads

Maintenance contracts for edge® Multiparameter EC/TDS/Salinity Meter

Troubleshooting and repair for edge® Multiparameter EC/TDS/Salinity Meter

Faults we see most often on this type of equipment

How to troubleshoot edge® Multiparameter EC/TDS/Salinity Meter

What to send us when you report the fault

Buying and installing edge® Multiparameter EC/TDS/Salinity Meter

Frequently asked questions about Hanna Instruments edge® Multiparameter EC/TDS/Salinity Meter

Do you service Hanna Instruments edge® Multiparameter EC/TDS/Salinity Meter?

How often should edge® Multiparameter EC/TDS/Salinity Meter be maintained?

Can you repair edge® Multiparameter EC/TDS/Salinity Meter if we bought it elsewhere?

Do you supply spare parts for edge® Multiparameter EC/TDS/Salinity Meter?

What is your response time if edge® Multiparameter EC/TDS/Salinity Meter fails?

What should we check before reporting a fault on edge® Multiparameter EC/TDS/Salinity Meter?

Can you troubleshoot edge® Multiparameter EC/TDS/Salinity Meter remotely?

Related equipment