pH Electrode with Built-In Temperature Sensor and DIN Connector

Reference HI1610D

The HI1610D is a glass body, refillable, single junction pH electrode with a DIN connector. This electrode has a single ceramic junction in the outer reference cell and the pH sensing portion is made with general purpose glass. This pre-amplified electrode features a built-in temperature sensor for temperature compensated measurements in a single probe design. This design consideration is ideal for laboratory and general purpose use. The HI1610D is recommended for use with Hanna's HI8314 pH meter.

Order this item

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference: HI1610D
Category: pH, Conductivity & Water Analysis
Equipment family: Industry/Industrial, Industry/Water, Industry/Laboratory, Industry/Food, Industry/Beverage, Product/Accessories, Product/Accessories/Electrodes and probes, Product/Accessories/Electrodes and probes/El

Overview

*Products classified as Dangerous Goods can only be shipped via ground.

Maintenance contract — AxiTech provides planned preventive maintenance for pH Electrode with Built-In Temperature Sensor and DIN Connector from Hanna Instruments: scheduled visits, safety checks, periodic calibration and a documented service report, backed by a contractual response time.

Troubleshooting, repair and spare parts — our ph, conductivity & water analysis engineers diagnose and repair pH Electrode with Built-In Temperature Sensor and DIN Connector on site or in the workshop, fit genuine spare parts and recommission the equipment after performance verification.

Features

Built-In Temperature Sensor
Single Ceramic Junction
Refillable Electrode

Technical specifications

Specifications

SKU: HI1610D Description pH electrode Reference single, Ag/AgCl Junction / Flow Rate e ceramic, single / 15-20 µL/h Electrolyte KCl 3.5M + AgCl Max Pressure 0.1 bar Range pH: 0 to 13 Recommended Operating Temperature 0 to 70°C (32 to 158°F) - GP Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor yes Amplifier yes Body Material glass Cable 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Cable: 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Range: pH: 0 to 13 Recommended Operating Temperature 0 to 70°C (32 to 158°F) - GP Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor yes Amplifier yes Body Material glass Cable 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Amplifier: yes Body Material glass Cable 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Reference: single, Ag/AgCl Junction / Flow Rate e ceramic, single / 15-20 µL/h Electrolyte KCl 3.5M + AgCl Max Pressure 0.1 bar Range pH: 0 to 13 Recommended Operating Temperature 0 to 70°C (32 to 158°F) - GP Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor yes Amplifier yes Body Material glass Cable 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Connection: DIN* Special Note * Recommended for use with HI8314 pH meter
Description: pH electrode Reference single, Ag/AgCl Junction / Flow Rate e ceramic, single / 15-20 µL/h Electrolyte KCl 3.5M + AgCl Max Pressure 0.1 bar Range pH: 0 to 13 Recommended Operating Temperature 0 to 70°C (32 to 158°F) - GP Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor yes Amplifier yes Body Material glass Cable 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Electrolyte: KCl 3.5M + AgCl Max Pressure 0.1 bar Range pH: 0 to 13 Recommended Operating Temperature 0 to 70°C (32 to 158°F) - GP Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor yes Amplifier yes Body Material glass Cable 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Tip / Shape: spheric (dia: 9.5 mm) Temperature Sensor yes Amplifier yes Body Material glass Cable 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Max Pressure: 0.1 bar Range pH: 0 to 13 Recommended Operating Temperature 0 to 70°C (32 to 158°F) - GP Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor yes Amplifier yes Body Material glass Cable 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Special Note: * Recommended for use with HI8314 pH meter
Body Material: glass Cable 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Recommended Use: laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Temperature Sensor: yes Amplifier yes Body Material glass Cable 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Junction / Flow Rate: e ceramic, single / 15-20 µL/h Electrolyte KCl 3.5M + AgCl Max Pressure 0.1 bar Range pH: 0 to 13 Recommended Operating Temperature 0 to 70°C (32 to 158°F) - GP Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor yes Amplifier yes Body Material glass Cable 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter
Recommended Operating Temperature: 0 to 70°C (32 to 158°F) - GP Tip / Shape spheric (dia: 9.5 mm) Temperature Sensor yes Amplifier yes Body Material glass Cable 5-pole 1 m (3.3') Recommended Use laboratory general use Connection DIN* Special Note * Recommended for use with HI8314 pH meter

Supply and reordering

AxiTech supplies pH Electrode with Built-In Temperature Sensor and DIN Connector as a spare, so a worn part is replaced during the same visit rather than becoming a second call-out.

Ordering pH Electrode with Built-In Temperature Sensor and DIN Connector

Tell us the reference, or the model and serial number of the instrument it belongs to, and we confirm the correct part, its price and its lead time. Parts ordered against a maintenance contract are carried on the visit.

Compatibility confirmed against your instrument before despatch
Quoted with a lead time, not just a price
Scheduled with your maintenance visit when you hold a contract
Standing orders for items you consume on a predictable cycle

The instrument it belongs to

AxiTech maintains, calibrates and repairs the Hanna Instruments equipment that pH Electrode with Built-In Temperature Sensor and DIN Connector is used with. If you operate it, we can put it under a preventive maintenance contract and supply this item as part of the schedule.

Discover our maintenance contracts Browse the equipment catalogue

Questions we are asked

Frequently asked questions about Hanna Instruments pH Electrode with Built-In Temperature Sensor and DIN Connector

Yes. AxiTech supplies pH Electrode with Built-In Temperature Sensor and DIN Connector to hospitals, clinics and laboratories, either as a one-off order or on a standing schedule. Send us the reference and the quantity and we come back with a price and a lead time.

It depends on whether the item is held regionally or ordered from the manufacturer, so we confirm a date with the quotation rather than after the order. Items covered by a maintenance contract are planned ahead of the visit so they are on site when the engineer is.

Yes. Consumables and wear parts can be written into the contract and delivered on the maintenance schedule, which removes the reorder cycle and the risk of a visit stalling because something was out of stock.

Keep it in its original packaging until it is fitted, and check the compatibility of the connector and the instrument firmware before installation. We confirm the correct part against your model and serial number before despatch.

Yes. Maintenance, calibration and repair of the instrument is AxiTech’s core business, and this item is one of the things we supply as part of that. Tell us the model you operate and we will propose a maintenance schedule around it.

Other Hanna Instruments equipment we supply, install and maintain.

Order this item

At a glance

Overview

Features

Technical specifications

Ordering pH Electrode with Built-In Temperature Sensor and DIN Connector

The instrument it belongs to

Frequently asked questions about Hanna Instruments pH Electrode with Built-In Temperature Sensor and DIN Connector

Do you supply Hanna Instruments pH Electrode with Built-In Temperature Sensor and DIN Connector?

What is the lead time for pH Electrode with Built-In Temperature Sensor and DIN Connector?

Can pH Electrode with Built-In Temperature Sensor and DIN Connector be supplied under a maintenance contract?

How should pH Electrode with Built-In Temperature Sensor and DIN Connector be stored?

Do you also service the instrument pH Electrode with Built-In Temperature Sensor and DIN Connector is used with?

Related equipment