AxiTech — The Core of Precision
Jumbo Vacuum Drying Oven — main photograph
LabTechAvailability: Supplied to order

Jumbo Vacuum Drying Oven

Reference 2571603

-

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference
2571603
Category
Ovens, Furnaces & Water Baths
Equipment family
Laboratory Ovens

Overview

Jumbo Vacuum Drying Oven‌Catalog Download

스테인리스 스틸 내부 챔버로 내부식성이 우수하고 청결함Stainless steel chamber for excellent corrosion resistance and easy cleaning충격 흡수 구조로 설계된 도어와 특수유리가 내부 폭발 시에도 사용자의 안전을 우선적으로 고려Door designed with shock absorbing structure and special safety glass ensure user safety in case of internal explosion단열과 이음새 없는 실리콘 패킹으로 된 밀폐 구조로 우수한 진공상태를 구현Insulation and sealing structure with seamless silicone packing enable excellent vacuum condition미세하게 조절 가능한 밸브로 진공 해지 시 분말 시료의 확산을 최소화Finely adjustable inert gas valve minimizes the spread of powder type samples열전도율이 우수한 알루미늄 선반 기본 포함Aluminum shelves with high heat conductivity are included as standard마이크로프로세서 PID 디지털 조절기로 보다 정확한 온도제어Microprocessor PID digital controller provides excellent precise control온도 오토 튜닝 기능으로 최적화된 온도제어Temperature auto-tuning function available타이머 99시간 59분 (타이머 종료 알람 가능)Timer 99hr. 59min. available (Timer end alarm available)온도 상한/하한 이탈 알람High/Low Temperature Alarm정전 후 전원 재공급시, 기존 설정값 보존 가능Setting value is preserved even when the power supply is cutSafety: Broken temp. sensor error, over temperature protection, electric leakage circuit breaker

Maintenance contract — AxiTech provides planned preventive maintenance for Jumbo Vacuum Drying Oven from LabTech: scheduled visits, safety checks, periodic calibration and a documented service report, backed by a contractual response time.

Troubleshooting, repair and spare parts — our laboratory & ivd engineers diagnose and repair Jumbo Vacuum Drying Oven on site or in the workshop, fit genuine spare parts and recommission the equipment after performance verification.

Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for Jumbo Vacuum Drying Oven

AxiTech provides preventive maintenance contracts for Jumbo Vacuum Drying Oven. Each contract fixes a schedule of planned visits in which our biomedical engineers inspect the equipment, replace wear parts before they fail, and verify that it still performs inside the manufacturer’s tolerances.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Laboratory analysers are usually maintained every three to six months, with calibration and quality-control verification at each visit so that results stay traceable.

  • Planned preventive maintenance visits at a fixed interval
  • Calibration and performance verification against the manufacturer’s specifications
  • A documented maintenance report after every intervention
  • Guaranteed availability of spare parts and consumables
  • A contractual response time when the equipment fails

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for Jumbo Vacuum Drying Oven

When Jumbo Vacuum Drying Oven fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

On analysers most faults come from the fluidics — blocked probes, worn pumps and tubing, leaking valves — followed by optical drift and reagent-handling errors.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop
Troubleshooting

How to troubleshoot Jumbo Vacuum Drying Oven

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

  1. Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.

  2. Review the quality-control and calibration history. A result that has drifted across several runs points at calibration or reagents; a sudden shift almost always points at the fluidics.

  3. Inspect the fluid path — probe, tubing, pump, valves and waste line — for blockage, crystallisation or leaks, and confirm reagent and wash levels together with their expiry dates.

  4. Confirm the ambient conditions the method depends on: bench temperature, ventilation, a level and vibration-free surface, and a stable mains supply.

  5. If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for Jumbo Vacuum Drying Oven.

What to send us when you report the fault

  • Manufacturer, model and serial number, from the rating plate
  • The exact error code or message, and the screen it appears on
  • When the fault started, how often it occurs and what triggers it
  • A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using Jumbo Vacuum Drying Oven and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing Jumbo Vacuum Drying Oven

AxiTech supplies Jumbo Vacuum Drying Oven together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training
Questions we are asked

Frequently asked questions about LabTech Jumbo Vacuum Drying Oven

Yes. AxiTech services Jumbo Vacuum Drying Oven, either under a maintenance contract or as a one-off intervention. Our biomedical engineers cover preventive maintenance, calibration, corrective repair and spare-parts supply for this equipment.

Related equipment

Other LabTech equipment we supply, install and maintain.