AxiTech — The Core of Precision
Thermal Shock Tester — main photograph
LabTechAvailability: Supplied to order

Thermal Shock Tester

Reference 2571533

-

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference
2571533
Category
Environmental & Stability Chambers
Equipment family
Environmental Chambers

Overview

Thermal Shock Tester‌Catalog Download

• Stainless steel chamber for excellent corrosion resistance and easy cleaning 스테인리스 스틸 내부 챔버로 내부식성이 우수하고 청결함• Built-in cold preservatory made by aluminum sink plate 알루미늄으로 된 냉열원이 내장됨• Excellent temperature recovery by rapid heat-up within 20 min. and cool down within 60 min. 20분 내의 신속한 가열과 60분 내의 냉각으로 우수한 온도 회복을 구현• Automatic motorized lift up and down mechanism directly moves the specimen to hot and cold zones for thermal shock 자동으로 들어올리고 내리는 기계장치로 열충격시험을 위해 시료를 고온과 저온 영역으로 옮김• Castors are installed as standard for convenient moving and installation 캐스터가 기본 장착되어 이동 및 설치가 편리• Programmable touch screen controller with PC interface as standard (RS-232C or RS-485 selectable) PC 통신(RS-232C 또는 RS-485 선택)이 기본 장착된 터치스크린 프로그램 조절기• Self-diagnostic and alarm system automatically check malfunction or errors with visual & audible alarm system 자가 진단 및알람 시스템이 자동으로 고장과 에러를 확인 • Temperature auto-tuning function available 온도 오토 튜닝 기능으로 최적화된 온도제어 • Timer 99hr. 59min. available (Timer end alarm available) 타이머 99시간 59분(타이머 종료 알람 가능)• Door open alarm 도어오픈 알람• Low water in humidifying reservoir alarm 가습조 물부족 경고알람• High/Low temperature alarm 온도상한/하한 이탈알람• Setting value is preserved even when the power s

Maintenance contract — AxiTech provides planned preventive maintenance for Thermal Shock Tester from LabTech: scheduled visits, safety checks, periodic calibration and a documented service report, backed by a contractual response time.

Troubleshooting, repair and spare parts — our laboratory & ivd engineers diagnose and repair Thermal Shock Tester on site or in the workshop, fit genuine spare parts and recommission the equipment after performance verification.

Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for Thermal Shock Tester

AxiTech provides preventive maintenance contracts for Thermal Shock Tester. Each contract fixes a schedule of planned visits in which our biomedical engineers inspect the equipment, replace wear parts before they fail, and verify that it still performs inside the manufacturer’s tolerances.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Laboratory analysers are usually maintained every three to six months, with calibration and quality-control verification at each visit so that results stay traceable.

  • Planned preventive maintenance visits at a fixed interval
  • Calibration and performance verification against the manufacturer’s specifications
  • A documented maintenance report after every intervention
  • Guaranteed availability of spare parts and consumables
  • A contractual response time when the equipment fails

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for Thermal Shock Tester

When Thermal Shock Tester fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

On analysers most faults come from the fluidics — blocked probes, worn pumps and tubing, leaking valves — followed by optical drift and reagent-handling errors.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop
Troubleshooting

How to troubleshoot Thermal Shock Tester

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

  1. Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.

  2. Review the quality-control and calibration history. A result that has drifted across several runs points at calibration or reagents; a sudden shift almost always points at the fluidics.

  3. Inspect the fluid path — probe, tubing, pump, valves and waste line — for blockage, crystallisation or leaks, and confirm reagent and wash levels together with their expiry dates.

  4. Confirm the ambient conditions the method depends on: bench temperature, ventilation, a level and vibration-free surface, and a stable mains supply.

  5. If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for Thermal Shock Tester.

What to send us when you report the fault

  • Manufacturer, model and serial number, from the rating plate
  • The exact error code or message, and the screen it appears on
  • When the fault started, how often it occurs and what triggers it
  • A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using Thermal Shock Tester and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing Thermal Shock Tester

AxiTech supplies Thermal Shock Tester together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training
Questions we are asked

Frequently asked questions about LabTech Thermal Shock Tester

Yes. AxiTech services Thermal Shock Tester, either under a maintenance contract or as a one-off intervention. Our biomedical engineers cover preventive maintenance, calibration, corrective repair and spare-parts supply for this equipment.

Related equipment

Other LabTech equipment we supply, install and maintain.