AxiTech — The Core of Precision
Ultra Low Temp. Freezer Single Compressor — main photograph
LabTechAvailability: Supplied to order

Ultra Low Temp. Freezer Single Compressor

Reference 2832165

· Temp. range: Max.-86℃ ~ -10℃· Compact type

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference
2832165
Category
Laboratory Refrigeration & Freezers
Equipment family
Ultralow Freezers

Overview

Ultra Low Temp. Freezer Compact TypeSingle compressor refrigeration system- Temp. range -86℃ MAX.- Rapid cooling efficiency -86℃ Catalog Download

Space saving installation by small capacity andcompact designed structureprovide table top or undercounter and 2 units stackablefor very quite operation by low noise level

Highly sophisticate mixed refrigerant gastechnologyprovides for fast cooling and performs ultra low temp.up to -86°C

Electric energy saving system with singlecompressor operation modeand optimum compressor on-off time cycle fortemperature stability performance

High density by high pressure polyurethaneinjected insulation thickness 100mm

High quality polished stainless steel #304 roundcorner chamber and perforated shelf

Insulated plastic inner doors with magnetic latchfor compartment storageprotects and maintain cold temperature

Built in battery backup systemfor controller DC power for supply

• High-low temperature limit alarm• Process signal lamp & password lock• Refrigeration system error alarm• Alarm for door open and close state• Battery back up for controller power

• Built in USB port with RS-485 interface, temperature and time data monitoring software• Hub connection from 1unit to 16units with 1PC, graphic monitoring on real-time data• Limitless data saving with graph and excel file for temp. with time frame

Maintenance contract — AxiTech provides planned preventive maintenance for Ultra Low Temp. Freezer Single Compressor from LabTech: scheduled visits, safety checks, periodic calibration and a documented service report, backed by a contractual response time.

Troubleshooting, repair and spare parts — our laboratory & ivd engineers diagnose and repair Ultra Low Temp. Freezer Single Compressor on site or in the workshop, fit genuine spare parts and recommission the equipment after performance verification.

Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for Ultra Low Temp. Freezer Single Compressor

AxiTech provides preventive maintenance contracts for Ultra Low Temp. Freezer Single Compressor. Each contract fixes a schedule of planned visits in which our biomedical engineers inspect the equipment, replace wear parts before they fail, and verify that it still performs inside the manufacturer’s tolerances.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Laboratory analysers are usually maintained every three to six months, with calibration and quality-control verification at each visit so that results stay traceable.

  • Planned preventive maintenance visits at a fixed interval
  • Calibration and performance verification against the manufacturer’s specifications
  • A documented maintenance report after every intervention
  • Guaranteed availability of spare parts and consumables
  • A contractual response time when the equipment fails

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for Ultra Low Temp. Freezer Single Compressor

When Ultra Low Temp. Freezer Single Compressor fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

On analysers most faults come from the fluidics — blocked probes, worn pumps and tubing, leaking valves — followed by optical drift and reagent-handling errors.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop
Troubleshooting

How to troubleshoot Ultra Low Temp. Freezer Single Compressor

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

  1. Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.

  2. Review the quality-control and calibration history. A result that has drifted across several runs points at calibration or reagents; a sudden shift almost always points at the fluidics.

  3. Inspect the fluid path — probe, tubing, pump, valves and waste line — for blockage, crystallisation or leaks, and confirm reagent and wash levels together with their expiry dates.

  4. Confirm the ambient conditions the method depends on: bench temperature, ventilation, a level and vibration-free surface, and a stable mains supply.

  5. If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for Ultra Low Temp. Freezer Single Compressor.

What to send us when you report the fault

  • Manufacturer, model and serial number, from the rating plate
  • The exact error code or message, and the screen it appears on
  • When the fault started, how often it occurs and what triggers it
  • A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using Ultra Low Temp. Freezer Single Compressor and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing Ultra Low Temp. Freezer Single Compressor

AxiTech supplies Ultra Low Temp. Freezer Single Compressor together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training
Questions we are asked

Frequently asked questions about LabTech Ultra Low Temp. Freezer Single Compressor

Yes. AxiTech services Ultra Low Temp. Freezer Single Compressor, either under a maintenance contract or as a one-off intervention. Our biomedical engineers cover preventive maintenance, calibration, corrective repair and spare-parts supply for this equipment.

Related equipment

Other LabTech equipment we supply, install and maintain.