AxiTech — The Core of Precision
HP Large Autoclave (Square Chamber) — main photograph
SturdyAvailability: Supplied to order

HP Large Autoclave (Square Chamber)

Reference HP Large Autoclave (Square Chamber)

Powerful, Reliable, and Customizable Sterilizer for CSSDs and Medical Centers. HP Large Autoclave are equipped with pre-vacuum, liquid, leak test, and air removal (Bowie-Dick) test cycles for fast, efficient autoclave sterilization of CSSD and hospital in scientific applications. Designed to porous loads, and liquid loads in vented and non-vented containers, while maximizing productivity, flexibility, safety, and reliability. The ample room of square chamber provide for sterilization economies of scale and saves time.

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference
HP Large Autoclave (Square Chamber)
Category
Autoclaves & Steam Sterilizers
Product range
Large Steam Sterilizers

Features

  • First-class Performance Compact Hospital Autoclaves
  • 110 to 848 Liter chamber volume
  • Single or double door
  • Built-in steam generator
  • Fractionated pre vacuum air removal
  • Overheating protection
  • Pressure overload protection
  • Jacket warm-up function
  • Emergency button
  • Digital data recorder (USB flash drive)
  • Dot-Matrix Printer
Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for Sturdy HP Large Autoclave (Square Chamber)

A service visit on the Sturdy HP Large Autoclave (Square Chamber) covers calibration of the temperature and pressure sensors, the door seal, lock and safety valve, the steam generator, vacuum system, drains and filters, and a recorded test cycle.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Steam sterilisers like the Sturdy HP Large Autoclave (Square Chamber) are normally serviced once or twice a year and revalidated every year, while users run the routine tests their class requires — for Class B units, a daily steam-penetration (Bowie-Dick or Helix) test and a regular vacuum leak test.

  • Temperature and pressure sensors calibrated
  • Door seal, locking mechanism and safety valve checked
  • Steam generator descaled, filters and drains cleaned
  • Test cycles run and recorded, including vacuum leak and Bowie-Dick tests on Class B models

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for Sturdy HP Large Autoclave (Square Chamber)

When Sturdy HP Large Autoclave (Square Chamber) fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

On steam sterilisers the common faults are failing door seals and locks, scale in the steam generator, blocked drains and filters, vacuum pumps that no longer reach their set point, and drifting temperature or pressure sensors.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop
Troubleshooting

How to troubleshoot Sturdy HP Large Autoclave (Square Chamber)

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

  1. Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.

  2. Inspect and clean the door gasket and the chamber drain filter: debris on either causes most pressure and vacuum errors.

  3. Check the water quality and level in the reservoir — tap water or a low level leads to scale, heating faults and aborted cycles.

  4. Run the manufacturer's test cycle (vacuum leak or Bowie-Dick test on Class B models) and keep the printout for the engineer.

  5. If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for Sturdy HP Large Autoclave (Square Chamber).

What to send us when you report the fault

  • Manufacturer, model and serial number, from the rating plate
  • The exact error code or message, and the screen it appears on
  • When the fault started, how often it occurs and what triggers it
  • A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using Sturdy HP Large Autoclave (Square Chamber) and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing Sturdy HP Large Autoclave (Square Chamber)

AxiTech supplies Sturdy HP Large Autoclave (Square Chamber) together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training
Product FAQ

Questions about the Sturdy HP Large Autoclave (Square Chamber)

Powerful, Reliable, and Customizable Sterilizer for CSSDs and Medical Centers. HP Large Autoclave are equipped with pre-vacuum, liquid, leak test, and air removal (Bowie-Dick) test cycles for fast, efficient autoclave sterilization of CSSD and hospital in scientific applications.

Related equipment

Other Sturdy equipment we supply, install and maintain.