AxiTech — The Core of Precision
UTL 25 digital Inline ULTRA-TURRAX® — main photograph
IKAAvailability: Supplied to order

UTL 25 digital Inline ULTRA-TURRAX®

Reference 0010006856

UTL 25 digital Inline ULTRA-TURRAX® laboratory stirrer from IKA — AxiTech supports hospitals, clinics and laboratories with sales, installation, maintenance contracts, calibration, repair and spare parts for this equipment.

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference
0010006856
Category
Shakers, Stirrers & Mixers

Overview

UTL 25 digital Inline ULTRA-TURRAX® For circulation or flow-through processing in the laboratory. Simple, compact and sturdy modular design Sterilizable, autoclave-compatible Table-top or stand-supported device, low space requirement Easy disassembly Large delivery capacity of 4.4 to 11.6 l/min with open outlet (the mounting of a valve can reduce the flow rate) For air-free, sterile, and inline suspension, emulsifying and deagglomeration For vacuum or pressurized operation (up to 6 bar) If the DK 25.11 is used, air induction is also prevented in batch operation Not self-priming A pump can be integrated between intake nozzle and vessel. As a result, viscous fluids can be processed Not suitable for continuous operation or cyclical continuous operation The hoses used should have an inner diameter size of 13 mm (inlet) and 9 mm (outlet) respectively to fit the DK 25.11 flow chamber Scope of delivery T 25 digital ULTRA-TURRAX® DK 25.11 flow chamber AD 25 mounting support S 25 KV - 25 G-IL dispersing tool

Maintenance contract — AxiTech provides planned preventive maintenance for UTL 25 digital Inline ULTRA-TURRAX® from IKA: scheduled visits, safety checks, periodic calibration and a documented service report, backed by a contractual response time.

Troubleshooting, repair and spare parts — our shakers, stirrers & mixers engineers diagnose and repair UTL 25 digital Inline ULTRA-TURRAX® on site or in the workshop, fit genuine spare parts and recommission the equipment after performance verification.

Features

  • Simple, compact and sturdy modular design
  • Sterilizable, autoclave-compatible
  • Table-top or stand-supported device, low space requirement
  • Easy disassembly
  • Large delivery capacity of 4.4 to 11.6 l/min with open outlet (the mounting of a valve can reduce the flow rate)
  • For air-free, sterile, and inline suspension, emulsifying and deagglomeration
  • For vacuum or pressurized operation (up to 6 bar)
  • If the DK 25.11 is used, air induction is also prevented in batch operation
  • Not self-priming
  • A pump can be integrated between intake nozzle and vessel. As a result, viscous fluids can be processed
  • Not suitable for continuous operation or cyclical continuous operation
  • The hoses used should have an inner diameter size of 13 mm (inlet) and 9 mm (outlet) respectively to fit the DK 25.11 flow chamber
  • T 25 digital ULTRA-TURRAX®
  • DK 25.11 flow chamber
  • AD 25 mounting support
  • S 25 KV - 25 G-IL dispersing tool

Technical specifications

Specifications
Weight
3.8 kg
Voltage
230 V
Frequency
50/60 Hz
Pump rate
11.6 l/min
Power input
500 W
Speed range
3000 - 25000 rpm
Process type
inline
Pressure max.
6 bar
Speed display
scale
Chamber volume
26 ml
Speed adjustment
stepless
Attainable vacuum
1 mbar
Motor rating input
500 W
Motor rating output
300 W
Extension arm length
175 mm
Noise without element
73 dB(A)
Dimensions (W x H x D)
450 x 120 x 100 mm
Extension arm diameter
13 mm
Permissible relative humidity
80 %
Permissible ambient temperature
5 - 40 °C
Protection class according to DIN EN 60529
IP 20
Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for UTL 25 digital Inline ULTRA-TURRAX®

AxiTech provides preventive maintenance contracts for UTL 25 digital Inline ULTRA-TURRAX®. Each contract fixes a schedule of planned visits in which our biomedical engineers inspect the equipment, replace wear parts before they fail, and verify that it still performs inside the manufacturer’s tolerances.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Plan at least one preventive maintenance visit per year, and a second visit for equipment in continuous or critical use.

  • Planned preventive maintenance visits at a fixed interval
  • Calibration and performance verification against the manufacturer’s specifications
  • A documented maintenance report after every intervention
  • Guaranteed availability of spare parts and consumables
  • A contractual response time when the equipment fails

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for UTL 25 digital Inline ULTRA-TURRAX®

When UTL 25 digital Inline ULTRA-TURRAX® fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

The faults we see most often are worn moving parts, power-supply and control-board failures, sensors that have drifted out of tolerance, and fluid or air paths that have become blocked or contaminated.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop
Troubleshooting

How to troubleshoot UTL 25 digital Inline ULTRA-TURRAX®

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

  1. Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.

  2. Confirm the power supply end to end — wall outlet, mains lead, fuse and any UPS or stabiliser in between. A device that is intermittently dead has a supply fault far more often than an internal one.

  3. Check the consumables and wear parts — filters, seals, tubing, probes, batteries — and note when each was last replaced. Anything past its service interval is the first suspect.

  4. Reproduce the fault once, deliberately, and record the sequence: what the operator did, what the device displayed, and whether a full power cycle clears it.

  5. If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for UTL 25 digital Inline ULTRA-TURRAX®.

What to send us when you report the fault

  • Manufacturer, model and serial number, from the rating plate
  • The exact error code or message, and the screen it appears on
  • When the fault started, how often it occurs and what triggers it
  • A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using UTL 25 digital Inline ULTRA-TURRAX® and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing UTL 25 digital Inline ULTRA-TURRAX®

AxiTech supplies UTL 25 digital Inline ULTRA-TURRAX® together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training
Questions we are asked

Frequently asked questions about IKA UTL 25 digital Inline ULTRA-TURRAX®

Yes. AxiTech services UTL 25 digital Inline ULTRA-TURRAX®, either under a maintenance contract or as a one-off intervention. Our biomedical engineers cover preventive maintenance, calibration, corrective repair and spare-parts supply for this equipment.

Related equipment

Other IKA equipment we supply, install and maintain.