AxiTech — The Core of Precision
Bio Medical Freezer - Compact Type — main photograph
LabTechAvailability: Supplied to order

Bio Medical Freezer - Compact Type

Reference 2823388

Laboratory freezer by LabTech: temperature range Max.-45 °C – 0 °C.

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference
2823388
Category
Laboratory Refrigeration & Freezers
Product range
Plasma Freezers

Overview

Bio Medical Freezer Compact TypeSingle compressor refrigeration system

-45℃ MAX.

Rapid cooling efficiency -40℃

Features

  • Temp. range: Max.-45℃ ~ 0℃
Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for LabTech Bio Medical Freezer - Compact Type

A service visit on the LabTech Bio Medical Freezer - Compact Type covers temperature verification against a calibrated probe, alarm and back-up tests, condenser cleaning, door gaskets and hinges, and the performance of the refrigeration system.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Laboratory refrigerators and freezers like the LabTech Bio Medical Freezer - Compact Type should have their temperature and alarms verified at least once a year; ultra-low freezers benefit from a six-monthly condenser clean and gasket check.

  • Temperature verified against a calibrated reference probe
  • High, low and power-failure alarms tested
  • Condenser and filters cleaned, door gaskets and hinges checked
  • Compressor and refrigeration performance assessed

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for LabTech Bio Medical Freezer - Compact Type

When LabTech Bio Medical Freezer - Compact Type fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

On refrigerated storage the usual faults are clogged condenser filters, worn door gaskets and ice build-up, alarm or probe failures, and compressors that run continuously because the system has lost refrigerant or airflow.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop
Troubleshooting

How to troubleshoot LabTech Bio Medical Freezer - Compact Type

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

  1. Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.

  2. Check that the door closes and seals fully, and clear ice from the gaskets and door frame — a poor seal is the most common reason a unit cannot hold temperature.

  3. Clean or check the condenser filter and make sure the unit has the clearance around its vents that the manual specifies.

  4. Compare the display with an independent thermometer and check the alarm history for recent power interruptions.

  5. If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for LabTech Bio Medical Freezer - Compact Type.

What to send us when you report the fault

  • Manufacturer, model and serial number, from the rating plate
  • The exact error code or message, and the screen it appears on
  • When the fault started, how often it occurs and what triggers it
  • A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using LabTech Bio Medical Freezer - Compact Type and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing LabTech Bio Medical Freezer - Compact Type

AxiTech supplies LabTech Bio Medical Freezer - Compact Type together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training
Product FAQ

Questions about the LabTech Bio Medical Freezer - Compact Type

Key specifications of the LabTech Bio Medical Freezer - Compact Type, according to the manufacturer: temperature range Max.-45 °C – 0 °C.

Related equipment

Other LabTech equipment we supply, install and maintain.