AxiTech — The Core of Precision
Dry Block Heater — main photograph
LabTechAvailability: Supplied to order

Dry Block Heater

Reference 2571587

Dry block heater by LabTech: temperature range Ambient +5 °C to 150 °C.

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference
2571587
Category
Incubators
Product range
Dry Block Heaters

Overview

Stainless steel chamber for excellent corrosion resistance

Compact design to be able to use at various places

Interchangeable heating blocks with excellent heat transfer (option)

A heater that is durable and excellent in heat transfer is equipped

Microprocessor PID digital controller provides excellent precise control

With a program controller, setting and controlling

0 programs & 10 steps are available (For program type only: LBH-T01P, LBH-T02P, LBH-T03P, LBH-T04P)

Temperature auto-tuning function available

Timer 99hr. 59min. available (Timer end alarm available)

High / Low temperature alarm

Setting value is preserved even when the power supply is cutSafety : Broken temperature sensor error Over temperature protection Electric leakage circuit breaker fuse

Features

  • Temp. range: Ambient +5℃ to 150℃
Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for LabTech Dry Block Heater

A service visit on the LabTech Dry Block Heater covers temperature calibration and a uniformity check across the chamber, the door seals, fans and heating elements, the over-temperature protection and alarms, and — on CO₂ or humidity-controlled models — the gas and humidity sensors.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Incubators, ovens and climate chambers like the LabTech Dry Block Heater are normally calibrated once a year; chambers used for stability studies or GMP work are temperature-mapped at the interval their qualification sets.

  • Temperature calibration and uniformity check across the chamber
  • Door seals, fans and heating elements inspected
  • Over-temperature protection and alarms tested
  • CO₂, O₂ or humidity sensors calibrated where fitted

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for LabTech Dry Block Heater

When LabTech Dry Block Heater fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

On incubators, ovens and chambers the common faults are worn door seals, failed fans or heating elements, temperature sensors that have drifted, CO₂ sensors out of calibration, and controllers that lose their settings.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop
Troubleshooting

How to troubleshoot LabTech Dry Block Heater

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

  1. Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.

  2. Check the door seal and that the door closes fully: frequent or long openings are the most common cause of temperature and CO₂ excursions.

  3. Place an independent thermometer in the centre of the chamber and compare it with the display once the chamber has stabilised.

  4. Confirm the over-temperature safety setting and the fan operation and, on CO₂ models, the gas supply pressure and cylinder level.

  5. If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for LabTech Dry Block Heater.

What to send us when you report the fault

  • Manufacturer, model and serial number, from the rating plate
  • The exact error code or message, and the screen it appears on
  • When the fault started, how often it occurs and what triggers it
  • A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using LabTech Dry Block Heater and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing LabTech Dry Block Heater

AxiTech supplies LabTech Dry Block Heater together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training
Product FAQ

Questions about the LabTech Dry Block Heater

Key specifications of the LabTech Dry Block Heater, according to the manufacturer: temperature range Ambient +5 °C to 150 °C.

Related equipment

Other LabTech equipment we supply, install and maintain.