AxiTech — The Core of Precision
Giant Enviromental Chamber — main photograph
LabTechAvailability: Supplied to order

Giant Enviromental Chamber

Reference 2571541

-

Request a service for this equipment

Nothing is charged online. Every request is reviewed by an AxiTech engineer before you receive a quotation.

At a glance

Reference
2571541
Category
Environmental & Stability Chambers
Equipment family
Environmental Chambers

Overview

Giant Enviromental ChamberCFC FREECatalog Download

스테인리스 스틸 내부 챔버로 내부식성이 우수하고 청결함Stainless steel chamber for excellent corrosion resistanceand easy cleaning견고한 팬모터를 이용한 강제순환방식으로 균일한 온도와 습도를 유지Forced air circulation by durable fan motors maintainsuniform temperature and humidity강화유리 내부도어로 온도와 습도의 변화 없이 내부 관찰 가능Tempered safety inner glass door is installed for easy viewing insideHEPA 필터가 상부에 장착되어 깨끗한 공기가 챔버 내부로 유입되어 배양 및 생장에 사용됨HEPA filter is installed on top to let filtered clean air be supplied into the chamber for culture and growth정수 필터가 장착된 내장된 물탱크로 자동으로 급수Automatic water supply system with a built-in reservoir with water filter캐스터가 기본 장착되어 이동 및 설치가 편리Castors are installed as standard for convenient moving and installaion와이어 코팅 선반 기본 포함Wire coating shelves are included as standardLED 램프 기본 장착LED lamps are installed as standard정밀 CO2 센서 기본 포함 (G모델만 해당)Precision CO2 sensor is equipped as standard (for G models only)Dual wavelength detectionNDIR (Non Dispersive Infrared)Stable & durable housingCO2 range 0 - 20% (option:0 - 5000 PPM)PC 통신 (RS-232C 또는 RS-485 선택)이 기본 장착된 터치스크린프로그램 조절기Programmable touch screen controller with PC interface as standard (RS-232C or RS-485 selectable)자가 진단 및알람 시스템이 자동으로 고장과 에러를 확인Self-diagnostic and alarm

Maintenance contract — AxiTech provides planned preventive maintenance for Giant Enviromental Chamber from LabTech: scheduled visits, safety checks, periodic calibration and a documented service report, backed by a contractual response time.

Troubleshooting, repair and spare parts — our laboratory & ivd engineers diagnose and repair Giant Enviromental Chamber on site or in the workshop, fit genuine spare parts and recommission the equipment after performance verification.

Service coverage

AxiTech maintains, repairs and supplies this equipment for hospitals, clinics, laboratories and imaging centres.

Maintenance contracts for Giant Enviromental Chamber

AxiTech provides preventive maintenance contracts for Giant Enviromental Chamber. Each contract fixes a schedule of planned visits in which our biomedical engineers inspect the equipment, replace wear parts before they fail, and verify that it still performs inside the manufacturer’s tolerances.

Every visit includes calibration and performance verification, and closes with a documented maintenance report you can present during an accreditation audit. Spare-parts availability and a guaranteed response time are written into the contract, so a breakdown never leaves a department waiting for an answer.

Laboratory analysers are usually maintained every three to six months, with calibration and quality-control verification at each visit so that results stay traceable.

  • Planned preventive maintenance visits at a fixed interval
  • Calibration and performance verification against the manufacturer’s specifications
  • A documented maintenance report after every intervention
  • Guaranteed availability of spare parts and consumables
  • A contractual response time when the equipment fails

Discover our maintenance contracts

Planned preventive maintenance and calibration under contract

Troubleshooting and repair for Giant Enviromental Chamber

When Giant Enviromental Chamber fails, our engineers start with a structured diagnostic: error codes, electrical and mechanical checks, and a functional test against the equipment’s own specification. That tells us whether the fault is a consumable, a worn part or a board-level failure before any part is ordered.

Straightforward faults are repaired on site so the department loses as little time as possible. Anything that needs a workbench, a full strip-down or a specialised spare part goes to our workshop and comes back only after a complete post-repair test and, where the equipment requires it, recalibration.

Faults we see most often on this type of equipment

On analysers most faults come from the fluidics — blocked probes, worn pumps and tubing, leaking valves — followed by optical drift and reagent-handling errors.

Discover our troubleshooting and repair service

Diagnostics, corrective repair and spare parts in the workshop
Troubleshooting

How to troubleshoot Giant Enviromental Chamber

Work through these checks before you escalate. They are the same first-line sequence our biomedical engineers run on arrival, and they either clear the fault or narrow it down enough that the intervention starts with the right spare part in the van.

  1. Capture the fault before you touch anything: write down the exact error code or message, the serial number from the rating plate, what the operator was doing and whether the fault clears on a restart.

  2. Review the quality-control and calibration history. A result that has drifted across several runs points at calibration or reagents; a sudden shift almost always points at the fluidics.

  3. Inspect the fluid path — probe, tubing, pump, valves and waste line — for blockage, crystallisation or leaks, and confirm reagent and wash levels together with their expiry dates.

  4. Confirm the ambient conditions the method depends on: bench temperature, ventilation, a level and vibration-free surface, and a stable mains supply.

  5. If the fault is still there, escalate with the evidence. Send AxiTech the model, serial number, error code and the checks you have already run, and an engineer will come back with a diagnosis, a repair quote and a spare-parts lead time for Giant Enviromental Chamber.

What to send us when you report the fault

  • Manufacturer, model and serial number, from the rating plate
  • The exact error code or message, and the screen it appears on
  • When the fault started, how often it occurs and what triggers it
  • A photograph of the display or of the fault, and the last maintenance report

If the fault survives all five steps, stop using Giant Enviromental Chamber and open a repair request. Continuing to run equipment through a fault it cannot clear turns a component failure into a board-level one, and on devices used for diagnosis or therapy it puts the result — and the patient — in doubt.

Discover our troubleshooting and repair service

Buying and installing Giant Enviromental Chamber

AxiTech supplies Giant Enviromental Chamber together with the accessories and consumables it needs to enter service. We handle importation, delivery and installation, then commission the equipment on site so that it is verified against its specification before the first patient or the first sample.

Installation is followed by training for the users and for your biomedical team, warranty registration, and — if you want it — a maintenance contract that takes over the day the warranty ends, so the equipment never spends a period without planned service.

Discover our equipment sales service

Delivery, installation, commissioning and user training
Questions we are asked

Frequently asked questions about LabTech Giant Enviromental Chamber

Yes. AxiTech services Giant Enviromental Chamber, either under a maintenance contract or as a one-off intervention. Our biomedical engineers cover preventive maintenance, calibration, corrective repair and spare-parts supply for this equipment.

Related equipment

Other LabTech equipment we supply, install and maintain.